Product Description

It is a general-purpose decorative, smooth, washable, alkyd-based flat/matt synthetic enamel for interior applications. It has excellent leveling and opacity to provide a smooth decorative flat finish on surfaces. It can be used for masonry and steel surface applications in moderate atmospheric environments. It is highly washable and easy to clean. It has excellent adhesion on recommended surfaces.

Product Features:

It is used as a general–purpose washable interior decorative finish for walls, ceilings, wood and metal surfaces. For steel surfaces, use Enamel Primer before applying Enamel Topcoat matt. It is not suitable for the applications, on continuous damp surfaces or in marine environments. It is used for only air–drying applications.

Technical Information

• COLOUR, DRY FILM - As per Shade Card
• FINISH, DRY FILM - Smooth / Matt
• VOLUME SOLIDS (ASTM D2697 - 50 ± 2%
• SPECIFIC GRAVITY - 1.50 ± 0.05
• THEORETICAL SPREADING - 8-10 M2 / LTR
• RECOMMENDED DFT (DRY FILM) - 30 – 40 Microns / Coat
• RECOMMENDED WFT (WET FILM) - 60 – 80 Microns / Coat
• FLASH POINT - 38°C

Drying Time:

Drying time @ 30°C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)

• TOUCH DRY - 1 – 1 ½ hours
• DRY TO RECOAT - 12 hours
• HARD DRY - 24 hours

Product Advantage

Washable and easy for cleaning, provides a decorative smooth flat/matt finish, excellent leveling and opacity, excellent adhesion, general purpose and economical finish.

Surface Preparation

Before application, the surface should be sound, clean and free from oil, grease, loose particles, dust, etc. Application can be done by the recommended application methods.

Application Information

• APPLICATION METHOD - Brush, Roller, Spray etc.
• CLEANING/THINNING - GP Thinner Or Turpentine
• THINNER (VOLUME) - 5 – 15% depends on the method of application
• CONV. SPRAY REQUIREMENTS - Possible
• AIRLESS SPRAY REQUIREMENTS - Pressure: 2000 – 2200 psi
• NOZZLE SIZE - 0.018” – 0.020”
• MIXING RATIO (BY VOLUME) - One pack
• POT LIFE @ 30°C (100 ml) - NA

SHELF LIFE @ 30ºC: 12 months, in original sealed container, with proper storage conditions.

SAFETY PRECAUTIONS:

As a general rule, avoid skin and eye contact by wearing overalls, gloves, goggles, masks etc. Spillage on the skin should immediately be removed by thorough washing with water and soap or a suitable cleaner. The eye should be flushed with fresh water. Avoid inhalation of vapours and paint mist by wearing suitable mask. In the event of ingestion and eye contact, seek medical attention immediately. Painting must be carried out in well-ventilated area. Smoking in the area should not be permitted. Local safety regulations should be followed.

STORAGE:

Store the paint in proper storage conditions as per the local regulations. Keep the paint container in sealed condition under shed, away from direct sunlight and extreme temperatures. Do not stock paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied paint,to avoid contamination. Handle with care. Stir well before use.

NOTE:

We warranty only the quality of our product and this data sheet is based on results obtained from experience and tests. We reserve the right to change data without prior notice. For surface preparation, safety details refer specifier and safety data.