TC RUST REMOVER is a highly effective, cleaner for thick and hard rust on metal surfaces, without causing any harm to the base metal. It dusts the surface by chemical reaction with the rust and converts it in thin phosphate. It contains media which provides a thin phosphate coating to the cleaned derusted surface, the substrate is suitable for further priming or painting.

RECOMMENDED USES

TC RUST REMOVER is recommended for removing rust or rust stains from the iron/steel surfaces, before painting. It promotes the adhesion and durability of primer and further coats. If the rust on the surface is not severe or hard, it can be applied with equal dilution with water. It is recommended for iron/steel surfaces.

COATING CHARACTERISTICS

• Colour : Colourless to slightly hazy
• Apperance - Liquid
• Odour - Acidic / Mild
• Specific Gravity - 1.30± 0.05
• P.H - > 1

SPECIAL PRECAUTION

Since it contains acid and other chemicals, use suitable hand gloves and eye protection. Always handle material with care and in case of skin contact wash with plenty of fresh water. Never keep the used material in the metallic tins. Keep away from the reach of children.

Application

Surface Preparation: Before application, the surface should be clean and free from oil, grease, loose particles, dust, etc

Click here to visit our corporate site to learn about more products.