Fevicol Nail Free Ultra Sealant-320G(16Nos/Ctn)

Fevicol Nail Free Ultra is a strong, versatile construction adhesive that bonds various materials without the need for nails or screws. It's known for its high-grab and water resistance.

This adhesive is suitable for both interior and exterior applications, making it versatile for a wide range of projects.

Fevicol Nail-free Ultra is a 1-part, high-grab adhesive-sealant that cures in the presence of atmospheric moisture into a tough & elastic rubber and provides excellent, primer-less adhesion between most construction surfaces without the need for a clamping solution or nailing or use of masking/double-sided adhesive tapes.

Fevicol Nail-free Ultra does not contain any solvents or isocyanates and is suitable for multiple surfaces used in modern construction work, including plywood, drywall, cement board, tiles, glass, mirror, ceramic, porcelain, Corian, concrete, marble, granite, brick, aluminium, ACP, steel & alabaster.

Features

• High initial grab & final strength.
• Does not require clamping, nailing or taping
• Does not stain surfaces or form bubbles during cure.
• Does not corrode metals
• Stays permanently elastic.
• UV & weather resistant.
• No shrinkage.
• Can be painted upon after 24 hours.
• Can bond to damp surfaces, seal wet areas and fix underwater leaks.

Key applications

• Elastic bonding of panels or profiles to frames.
• Mounting wall cladding elements such as ply, ACP, Plywood-laminate composite, alabaster on aluminum channel & wooden frames or walls.
• Mounting stone slabs for kitchen countertops or dining tables.
• Sandwiching wooden frames with stones under
• kitchen platforms for cabinet frame mounting purposes.
• Fixing mirror/Painted Glass on tiles, plywood, Fiber cement, Bison Board and WPC board
• Fixing tiles, marble & granite to plywood, concrete & various other substrates.
• Providing water-tight seal between two connecting rainwater gutter duct lengths.
• Can be used for DIY applications for small fixing and repair with compatible substrates.

Application technique

• Clean both the surfaces being bonded to ensure that they are clean, dry, and free from dust, dirt, oil, loose particles, or any other contaminants
• Cut the Cartridge, insert it into the cartridge gun and fix the V-cut nozzle on top.
• Apply the sealant beads in a zig–zag pattern on one of the substrates with approx.1-inch distance between each sealant bead.
• It is recommended to keep a gap of 35 mm at all sides of large panels where sealant will be applied to avoid any excess material coming out from the edges and to control any visible gap between the 2 bonded surfaces.
• Align the surfaces together (as per requirement) as quickly as possible and press firmly for 2-3 minutes. Parts can be re-adjusted up to 6 minutes, depending on the temperature.
• . If the conditions are dry (>35 °C, R.H. < 50 %), it is recommended that the sealant beads be exposed to the atmosphere for 1-2 min before bonding onto other substrates.
• For putting heavier weights, such as glass or stone shelves on wall-mounted ‘C’ clamps or brackets, allow the adhesive to cure overnight before putting the shelves in place.
• Seal the nozzle with the help of a tape. If the bottle is to be reused, ensure it is done within 24-48 hours of opening. Cut the nozzle tip to remove cured sealant before re-use.
• Wash hands with soap & water after product use.

Click here to visit our corporate site to learn about more products.