3M Edge Sealer 3950 1/2 Pint 8oz For Vinyl Graphics, Wraps

3M™ Edge Sealer 3950 is a fast-drying, clear, liquid acrylic/vinyl solution designed to seal the exposed edges of adhesive vinyl graphic films. It acts as a protective barrier that prevents film lifting, peeling, or degradation caused by environmental exposure, cleaning agents, moisture, and contaminants.

Usage and Applications

It is primarily used to seal film edges to ensure long-term adhesion, particularly in high-stress environments.

Key Application

• Aerospace: Sealing graphic films on aircraft fuselages and wings to withstand high speeds and temperature differences.
• Transportation: Commercial truck, trailer, and vehicle wraps, specifically on edges prone to lifting, such as around wheel arches, sills, and fuel fillers.
• Signage: Marine graphics, fleet graphics, and outdoor signage.
• Compatibility: Designed for use with compatible 3M graphic films.

How to Apply 3M Edge Sealer 3950

• Preparation: Ensure the graphic film is fully adhered, and the edge area is dry, clean, and free from dirt, dust, or grease.
• Application Temperature: Apply only in temperatures between 50° to 100° F (10°C to 38°C).
• Application Method: Using the felt dauber provided or a small brush (approximately 0.6 cm or 1/4 inch), apply a thin, continuous bead of sealer along the edge of the graphic.
• Coverage: The sealant should overlap roughly half on the film and half on the substrate (the vehicle/surface).
• Drying: It is fast-drying (typically within 20-30 minutes), but it is recommended to allow it to dry completely.

Key Features

• Composition: Acrylic/vinyl solution in xylene.
• Resistance: Excellent water resistance, mild acids, alkalis, and salts.
• Visibility: Dries clear, making it suitable for non-visible or less-visible areas.
• Convenience: Often packaged in an 8 oz (half-pint) tin with a "brush-in-cap" for easy application.
• Shelf Life: 24 months in original, tightly capped container

Click here to visit our corporate site to learn about more products.